Magnetic Vehicle Signs
Our magnetic signage is printed on to Vinyl then applied to a magnetic material designed for Vehicle grade. You can have anything printed on to our magnetic signs and our sizes range from A5 to A1 Sizes. You can order either Square cut or with Rounded corners.
They can provide both temporary and permanent advertising for all kinds of businesses and events.
Simple steps to damage free bodywork.
1. WASH & DRY
Clean your vehicle surface with mild soap and water.
Place your magnet onto your vehicle’s door or side panel.
Clean and dry under your magnet at least once a week.
Take off the magnet before car washes and between uses.
Questions & Answers
Q: How thick are your vehicle magnets?
A: Each of our custom car magnets is 0.85 mm thick.
Q: Can I put a car magnet on a door that is curved?
A: Most likely. Your magnets should be able to stay in place without any issues on doors or side panels with slight curves to them – and they work very well on flat surfaces. If your surface has dips or bumps, we don’t recommend magnets.
Q: How strong is each magnet?
A: The magnetic strength is 90 lbs. per square foot.
Q: How long will my magnet last?
A: With proper care and use, custom car magnets can be used for about two years. At that point, we strongly recommend replacing your magnet to prevent it from falling off your vehicle while you drive.
Q: Should I match my car magnet to the colour of my vehicle?
A: We recommend that you create an advertising magnet in a different (yet complementary) colour. Not only does this help your magnet stand out to people, it’s the easiest way to create a consistent look across multiple vehicles of differing colours. Just make sure you keep your messaging and design simple and clear.
Q: Can I put a magnet on a new paint job?
A: No, you’ll want to wait for your paint to cure – and this is also the case with a new clear coat or wax job. The recommended wait time is 90 days for a new coat of paint, 60 days for a clear coat and 2 days for wax.
Q: Will I ever have to take car signs off my truck?
A: Yes. We recommend these magnets for short-term use, especially repeat short-term use. Long-term use without caring for the car surface underneath can run the risk of paint damage.
Q: How often should I take the magnets off my vehicle?
A: At least once a week – and we recommend that you wash and dry the space under your magnet. If you live somewhere that experiences extreme weather, we recommend you remove your magnet more frequently – ideally once a day – to keep your magnet and car paint looking fresh.
Q: Can I wash my car with these magnets on?
A: We recommend removing magnets before washing your vehicle.
Q: Does your car magnets stick to all vehicles?
A: Like all magnets, our car magnets stick to ferromagnetic metals, including iron, steel, nickel and cobalt. They will not stick to fiberglass, wood, plastic, etc.
Here you will find links on various fitting guides, please note these are only here to guide you when fitting your item. PrintPeel&Stick takes no responsibility for any damage caused when fitting or removing your products, this is the sole responsibility of the fitter.
Gel Fitting Guides:
General Gel Badge Fitting Guide >>Click Here<<